CBF Industries offers a wide variety of work locker accessories for the lockers it supplies. A long list of work locker accessories is provided below, but if you don’t see what you’re seeking, give us a call at (216) 877-8480 or contact us online.
Work locker accessories of all types are necessary for a complete installation on most locker and storage projects. The various items we make available will help you complete your installation, repair an existing system, or add more space.
Flat Top Filler
The flat top filler is used on flat locker tops to fill the space between two locker tops or a locker top and the wall.
Sloping Top Filler
Sloping top fillers are used with sloping top lockers to fill the space between two locker tops or a locker top and the wall.
Three-Wide Sloping Top
Three wide sloping tops prevent unnecessary clutter and provide a clean, finished appearance. Also available in one wide top to cover single lockers.
Flat-Top Corner Filler
Flat top corner filler is used to fill the corner space between two locker tops.
Sloping-Top Corner Filler
Sloping top corner filler is used with sloping locker tops to fill the corner space between two locker tops.
Flat-Top Boxed End Panel
Flat top boxed end panels are designed to give a finished look and a sturdier end to a row of free-standing lockers.
Sloping-Top Boxed End Panel
Sloping top boxed end panels are used with sloping top lockers to give a finished look and a sturdier end to a row of free-standing lockers.
Ventilated Door
All lockers can be ordered with ventilated doors when additional ventilation is required.
Horizontal Trim
These decorative trim pieces fill the space between the lockers and the wall when lockers are recessed. Horizontal trim comes in 72″ lengths for custom, on-site trimming.
Vertical Trim
These decorative trim pieces fill the space between the lockers and the wall when lockers are
recessed. Vertical trim is available in 60″ and 72″ heights.
Splice Cap
Splice caps provide a uniform, even joint where more than one piece of trim meet.
Corner Splice Cap
Corner caps are used to join horizontal and vertical trim pieces.
Outside Corner Cap
Outside corner caps are used to join trim pieces and turn a corner.
Z Brace/Bottom Angle
Z Braces provide reinforcement and secure the bottom of the locker to the floor, while adding toe space under the locker. Bottom angles are used as a decorative filler for the bottom face of the locker.
Angle Filler Panel/Flat Filler Panel
Angle filler panels are used to close the space between a locker and the wall or between two lockers when an obstruction prevents the installation of another locker. Flat filler panels require two filler panel frames; angle filler panels require only one.
Filler Panel Frame/Corner Angle
Filler panel frames attach to locker frames to secure front filler panels. Corner angles are used in inside corners to provide a finished appearance.
Front Base/Closed End Base
Closed front bases fit between front locker legs to provide a flush, finished appearance. End bases fit between front and rear legs of a row-ending locker.
1-Wide Closed Base
Used only on lockers with no legs, the closed base is a one piece, fully enclosed, 6″ tall, steel base to raise the locker off the floor. Bases include leveling feet to adjust for uneven floors.
3-Wide Closed Base
3-Wide Bases are the perfect finished look when utilizing our 3-Wide lockers with no legs. The base is closed on all sides and raises the locker unit off the floor. Bases include leveling feet to adjust for uneven floors.
Locker End
Locker ends are used to finish a row and give a clean, attractive, appearance.
Locker Benches/Pedestals
A clear lacquer finish protects these 1¼” thick laminated maple benches. Heavy duty steel pedestals have an enamel finish to match your lockers. Benches are 9 ½” wide and 36″ to 144″ long.
Coat Rod
These painted (medium grey only) steel coat rods are ½” in diameter and are available in 9″, 12″, 15″, 18″, 21″, and 24″ lengths.
Coat Hook
Additional coat hooks can be added to any locker. Coat hooks can be factory welded into assembled units, if specified at time of order. Single hook or double hook available.
Shelves and Partitions
Add shelves to customize locker compartments or vertical partitions to create dual compartments in single tier lockers.
Painted Steel Recessed Cup
Our standard steel handles are painted with a black powder-coated finish and are scratch resistant.
Stainless Steel Recessed Cup
Add an extra touch of quality with our optional stainless steel recessed cup. Scratch resistant.
Grooved Key Lock
This built-in deadbolt lock features a rust-resistant steel case and a large assortment of differing keys. The grooved key lock ensures additional security. Masterkeyed systems are available.
Manual or Automatic Locking Combination Deadbolt
Both built-in locks are master keyed systems with changeable combinations. The precision mechanism never needs lubricating, and a stainless-steel case covers the mounting bolts for security.
Combination Padlock/Masterkeyed Combination Padlock
A self-locking shackle and automatic disarranging tumblers make these locks virtually tamper-proof. Masterkeyed system provides additional control. Shackle diameter is 9/32″ (7mm).
ADA Compliant Lock
Now it is even easier to access a locker with our ADA Compliant lock. To open the lock, simply insert the key and push up on the handle. Allows one-handed opening of the locker door.
Master Gravity Lock
Master Gravity Locks feature a built-in combination lock with an automatic locking lift handle and a vertically operating bolt to ensure security of contents.
Number Plates
Number plates provide order and a clean, finished look. Field-installed blank paper plate with plastic shield for custom identification comes standard. Also available are field-installed factory numbered aluminum plates for an additional cost.
If you don’t find the work locker accessories you need from the list above, please give us a call at (216) 877-8480 or contact us online.